Mitsubishi Triton Strada, L200, Warrior, Sportero, Hunter 2012-2017
TRUE SUSPENSION LIFT KIT
4-9” inches
World Wide Shipping by DHL & TNT Express is available for all KITS
To all Country’s
Made from STEEL- NOT Aluminum as there are many CHINA made Aluminum COILS made from standard grade aluminum which cracks and breaks under Road Conditions – Some say T-6 Aluminum [ Strong Grade] but it is NOT as the Cheap CHINA price reflects this reality ,some are anodized to make it look special ! its NOT ! . Ours is made of STEEL like your Truck Frame [ heavy and more cost to ship but its SAFETY design - ] to meet the manufactures Factory Safety TEST specifications for drive train and steering conditions . - Is your life worth the Cheap China Knockoff ? Sure its cheaper to ship Aluminum but at your family’s LIFE expense in the savings . There is never an excuse for cheapness when SAFETY is involved.
If your country is NOT listed just contact us for s Express delivery price by DHL 3-7 days in most areas
GAIN REAL GROUND CLEARANCE / 4" FRONT + 4-9" BACK
DAYTONA-CPS
4" (= approx. 100mm) FRONT
+
4-9" (= approx. 230mm) REAR [ Adjustable see NOTE BELOW]
COMBO SUSPENSION LIFT KIT
for Mitsubishi Triton 2012-2017
FITS ALL NEW Mitsubishi Triton MODELS
FOR 2 DOORS SINGLE CAB, 2 DOORS OPEN CAB AND 4 DOOR DOUBLE CAB
Lifts your Mitsubishi Triton to allow for more ground clearance and bigger tires!
Our kits provide you with all the necessary parts to lift your truck! This is the best high quality lift kit for any truck enthusiast by using existing suspension components rather than cutting and welding costing you hundreds of dollars on top of the kit itself.
Pls. DO NOT CONFUSE OUR DAYTONA-CPS COMBO SUSPENSION LIFT KITS WITH CHEAP BODY LIFT KITS
Body lift kits only lift the body off the frame of a car and therefore offer no performance advantage other than tire clearance.
Body lifts kits lead to the following problems:
Ugly exposure of trailer hitches, ugly gaps between trucks frame and cab/bed, need to extend/adjust fuel filler hoses, steering column, engine cooling fan air guiding parts, etc.
Our DAYTONA-CPS suspension lift kit offers you
clear performance advantages
by spacing down your vehicles
factory suspension.
This way you will get:
- Enhanced looks
- Increased tire
clearance
enabling you to mount lager wheels/tires
- Increased ground clearance
resulting in improved off-road capabilities
Contents of our DAYTONA-CPS COMBO SUSPENSION LIFT KIT:
- 2 x coil spacers
CNC-manufactured – for 4” front lift**
- 2 x 9"-10" Rear Shackle Lift Leveler -ADJUSTABLE
manufactured from heavy duty S235JR construction steel with
antirust coating
- 2 x 4" Rear Lift Leveler blocks
manufactured from heavy duty S235JR construction steel with antirust coating
- 4x special prolonged leaf spring U-bolts
made from industrial grade carbon steel alloy
- All required nuts and fasteners
- Detailed English PDF Picture Diagram installation instructions .
** IMPORTANT NOTE: The lift / coil spacer thickness ratio is not 1:1. This means that the lift achieved lift height is much greater than the actual thickness of the coil spacers. The reason for this is that the lower control arm compounds the amount of lift due to its angle and length. Front 4" represents lift amount, NOT the spacer thickness. This lift kit is designed to give you an overall lift of up to approximately 4 inches (100mm) front / 4-9 inches up to 230mm back).
This is the recommended maximum which you can lift your vehicle without affecting your vehicles driving characteristics in a negative way. Shackle lifts are typically measured in halves. Meaning a 10" taller shackle produces 5" of actual lift. This is because only one end of the spring is being lifted. Shackles do change steering caster and drive-line angles, Plus the 4" axel blocks CAN PRODUCE 4" from Blocks and+5" which is 1/2 of the Shackle =9 total inches , This is NOT A FIRM number, many variations may make it less due to age of springs, and loading,
NOTE :--- You will have to adjust the Brake fee line in the rear as the original line is only good for max 4 inch lift, Shocks may need add shock extensions if off road driving, however they may fit but would have restricted travel , Axel Pinion angle will need adjustment with Axel shims,
THIS IS A KIT WHICH WILL NEED CUSTOM WORK TO YOUR TRUCK
Axle Shims for Rear Pinion angle adjustment [ NOT SUPPLIED] available at the drive line alignment shops are these steel shims are designed to change your pinion or caster angle on a leaf spring suspended vehicle and a requirement during the professional alignment that’s is recommended.
Our Daytona Full Lift Kits are precision engineered to lift and or level your truck. Our offerings include various size combinations for the front and rear so you can change or customize your truck to the required ride height. If there’s something you require, please message us and we’ll be happy to put an offer together for you!
The Mitsubishi Triton is a compact pickup truck produced by Mitsubishi Motors. (2012–2016) Triton was unveiled in 2005. Designed by Akinori Nakanishi, it is built exclusively by Mitsubishi's subsidiary in Thailand and is exported to 140 global markets.[2] It is mostly known as L200 except for Japan and its subsidiary countries' markets. The car has a 2.5 litre turbodiesel engine developing 134 hp or 180 hp. Also called Mitsubishi L200, Mitsubishi Triton (Australia), Mitsubishi Strada, Mitsubishi Warrior, Mitsubishi Sportero, Mitsubishi Hunter (Israel).
Production 2012–2017 Assembly Thailand: Laem Chabang (Mitsubishi Thailand) ,Brazil: Catalão (Mitsubishi Brazil), South Africa: East London (Daimler AG)
This is shipped DHL EXPRESS International AIR 3-7 BUSINESS Days depending on your area
Stock Is Kept in Canada, Thailand and Europe Locations, Shipping location may vary due to STOCK availability, but we will always ship in 1 business days and Delivery is AIR DHL -3-5 days as noted. Some country’s will charge Import duty on items entry to country.
All Returns are paid for by BUYER
Mitsubishi Triton - StradaL200 - Warrior Coil- Shackle SUPER LIFT KIT 4-9 Inch
- Brand: MITSUBISHI
- Product Code: LIFTKIT3
- Availability: In Stock
-
NT$13,140.80